Internal inspection of semi-transparent objects by digital holographic micro-tomography

The combined use of digital holographic microscopy and computer tomography, here named digital holographic micro-tomography, is used to examine the interior of transparent channels. The proposed method is used to identify internal obstacles inside of transparent troughs having slightly different refractive index. The method is based in the acquisition of a set of digital holograms of the specimen whereas it is axially rotated from 0° to 180°. The phase differences retrieved from the obtained holograms are the inputs to a computerised axial tomography procedure. The technique has been numerically modelled in order to find the optimal tomographic conditions and also to realise the minimum difference of refractive index the method could detect. The obtained results show the feasibility of the proposed method for the non-destructive evaluation of transparent micro-objects.     

Product Inhibited Enzymatic Reactions on the Rotating Disk Electrodes

A model of cyclic staircase voltammetry of enzymatic reactions on the rotating disk electrode is developed and the inhibition by the product is investigated. The responses are mostly time – dependent current – potential curves with maxima in the forward but not in the backward branch. If the maxima appear in both branches, the inhibition is potential – dependent either directly or indirectly. The source of the second maximum is explained.     

Scanning schemes in white light Photoelasticity – Part I: Critical assessment of existing schemes

The use of white light based Three Fringe Photoelasticity (TFP)/RGB Photoelasticity has gained importance in the recent years. With recent advances in TFP, it is possible to resolve fringe orders upto twelve. The main advantage of this technique is that it requires only a single image for isochromatic demodulation, which makes it suitable especially for problems where recording multiple images is difficult. The accuracy of isochromatic data obtained using TFP/RGB Photoelasticity is dependent on the scanning scheme used to refine the data, which is necessary to incorporate fringe order continuity. In this paper, the existing scanning schemes are critically evaluated for their ability to scan the entire model domain, influence of seed point selection and noise propagation. The scanning schemes are assessed using four problems of increasing level of geometric complexity – Circular disc under compression (simply connected), bi-axially loaded cruciform specimen with an inclined crack, a thick ring subjected to internal pressure and a finite plate with a hole (multiply connected).     

Digital photoelasticity of glass: A comprehensive review

The recent advances in digital photoelasticity have made it possible to use it conveniently for the stress analysis of articles and components made of glass. Depending on the application, the retardation levels to be measured range from a few nanometres to several thousand nanometres, which necessitates different techniques and associated equipments. This paper reviews the recent advances in the photoelasticity of glass with a focus on the techniques/methods developed in the last decade. A brief introduction to the residual stress in glass is provided initially to bring out its tensorial nature. The subsequent sections are organised thematically rather than chronologically, for better readability and easy access of information.     

Experimental investigation of the effect of temperature on the strength of polyimide contact structures

A new photogrammetry based measurement technique for contact areas in line contact structures is developed. From the data collected by this technique, a method for measuring the contact strength of contact structures in high temperature applications is proposed. The contact strength of a line contact structure of polyimide at different temperatures is measured; the results show that the increase in temperature decreases the contact strength of the structure. The effect of temperature on the contact strength is studied by investigating the occurrence and evolution of yielding core within the structure at different temperatures. The decrease in the yield strength and elastic modulus of the polyimide material at high temperature induces core yielding at lower loads and eases the propagation of core yielding to the surface.     

Error evaluation for Zernike polynomials fitting based phase compensation of digital holographic microscopy

Combining the experimental research with the simulation calculation, the error evaluation for Zernike polynomials fitting (ZPF) based phase compensation of digital holographic microscopy (DHM) is performed. The obtained results show that the reconstructed phase with high precision can be obtained by ZPF phase compensation algorithm. Moreover, the phase error for ZPF based phase compensation algorithm increases with both the variation of object height and object transverse area, the larger variation of object height, the larger of phase error, and the larger of object transverse area, the faster increase of RMS phase error. To decrease the error of ZPF phase compensation algorithm, it is required to ensure one of the variations of object height and object transverse area to be a small value. Importantly, the proposed method supplies a useful tool for the error evaluation of phase compensation algorithm.     

Flexible sheet with radiophotoluminescence glass beads for remotely monitoring high beta-surface-contamination

A flexible sheet was made with radiophotoluminescence (RPL) glass beads on an experimental basis for visualization of high beta-surface-contamination. A simple RPL observation system for remote contamination monitoring was constructed with a homemade UV floodlight and a commercially available digital camera with supplementary optical lenses and filters. In preliminary experiments, RPL images were well observed with the digital camera of the present system. Their precise RPL intensity was determined after the correction of nonlinear response of the camera. It was expected from experiments that RPL images of beta-surface-contamination could be quantitatively evaluated through calibration, i.e., the conversion of camera images to dose data on the sheet-type glass dosimeter.     

基于声表面波技术实现数字微流体多基片间输运

建立了声表面波实现多基片间输运微流体的新方法.由3个128(0)YX-LiNbO3压电基片组成,一个基片为接口基片,另两个为工作基片,每个基片光刻一个中心频率为27.5 MHz叉指换能器和一个反射栅.采用微量进样器将待输运的数字微流体进样到工作基片2,调节接口基片使得其与工作基片2位于同一高度,并使其间隙尽可能小,在工...     

Investigation on interlaminar delamination tendency of multidirectional carbon fiber composites

In this investigation carbon fiber reinforced laminates with different orientation layups are prepared and studied under tensile loading condition. Multiple strain measurement techniques, namely, resistive strain gauges, embedded optical sensors and digital image correlation are used to analyze stress-strain behavior simultaneously through the thickness of composite materials, and to determine the sequence of failure in different plies. Inconsistencies of strains measured through different methods is correlated with the tendency for interlaminar delamination, therefore demonstrating the ability of multi-instrument approach to describe damage progress through the thickness of multidirectional laminates. Complementary analysis through acoustic emission methods reveals that the angle of off-axis surface plies can influence the sequence of failure under tensile loading condition, and damage monitoring capabilities of acoustic emission system is directly affected by delamination tendency of surface plies. Remarkably, the delayed failure of off-axis plies is shown to be related to reorientation of these layer towards loading direction using infrared thermography method.